USD
  • USD
  • EUR
  • AUD
Login

Formative Clic

Formative Clic

In Stock

Compare Size Chart

CALL FOR PRICING

Formative Clic showcases natural hardwood patterns with all the benefits
of SPC flooring, a simple click-together, glue-less installation and acoustic
properties. 61 IIC (ATSM E492)

Medium Duty

Perfect For

Multi-Purpose Rooms, Gym Cardio Areas, Yoga Studio

Environment High Impact Individual Sizes 7 in. x 48 in. (0.2 m x 1.2 m)
Construction Ceramic-enhanced top surface.20 mil wear layer, décor film layer, SPC Core with click design, IXPE Backing Total Weight 9.76 kg./sq. m. (2 lbs./sq. ft.)
Face Style Smooth Warranty 10 year
Backing 1.5 mm IXPE backing Colour 12 Colours
Thickness 0.3 in. (6.5 mm)


FORMATIVE CLIC GENERAL INFORMATION AND TECHNICAL DATA

GENERAL INFORMATION
Formative Clic flooring is the newest generation of high-quality resilient flooring. It is a modular, click-together commercial
floor covering with a unique interlocking edge design that allows for easy installation.
This product must be used for interior applications only and be installed by professional installers that have sufficient
professional liability insurance coverage (aka Errors and Omissions Insurance) for the project. Caution should be used in the
moving and lifting. Allow for appropriate equipment and manpower to safely move materials. Work safe and always follow the
relevant safety procedures.
Edgewood Matting Ltd.. recommends installing and maintaining entrance matting at all outdoor entrances; this will improve
air quality, reduce maintenance costs, and lengthen the life of your floors.
Proper glides must be used on all furniture that may slide directly across the floor, consult the furniture manufacturer for
recommendations for use on resilient flooring. Heavy objects must not be moved directly across the floor; use protective
boards.
Direct sunlight can cause UV damage (fading or bleaching) to most interior finishes, so Low E glass should be selected that will
reduce the UV transmission to less than 1%. If not, applying 3M™ protection film (or similar) on the windows is
recommended.
Do not install any material that has visible defects or damage. A contractor that installs any material that has visible defects or
damage assumes responsibility for the damaged material.
All Safety Data Sheets (SDS) and Installation, Maintenance and Warranty requirements must be read, understood and
followed.
These instructions supersede any verbal or written instructions from Edgewood Matting Ltd. representatives, and must be
followed in order for the limited warranty to be in effect.


TECHNICAL DATA

Plank size 7 inch x ~47.638 inch
Roll size 10 planks per case, ~23.3 square feet per case. Thickness 6.5 mm Weight 2.0 pounds per square foot; 47.6 pounds per carton Edge format Microbevel pressed edge Interlocking edge Uniclic angle edge on long edges & I4F drop-in click on short ends Wear layer 20 mil wear layer Composition Heterogeneous Backing 1.5 mm IXPE backing Limited warranty 10 year commercial
Performance Test Method Requirement Result

Heat Stability ASTM F1514 <8.0 E Pass
Light Stability ASTM F1515 <8.0 E Pass Residual Indentation ASTM 970 Static Load Limit 0.004” Pass Squareness ASTM F2421 Pass Dimensional Stability ASTM F2199 ≤0.20 in/linear ft. Pass Flame Spread ASTM E648 ≥ 0.45 w/cm² Pass, Class 1 Coefficient of Friction ASTM D2047 Wet 0.5 / Dry 0.6 Smoke Density ASTM E662 ≤450 Pass Impact Sound Reduction ASTM E492-09 with ceiling IIC ≥ 11 IIC 61




page 2
CONDITIONS STORAGE AND ACCLIMATION Concrete Moisture Limits
Moisture testing must follow the protocol of ASTM F2170, (ASTM 1869 may be conducted as well, but only as a secondary
indicator). Test results must not exceed the published limits below.
It may not be the flooring contractors’ responsibility to conduct moisture testing. It is, however, the flooring contractors’
responsibility to make sure these tests have been conducted and that the results are acceptable prior to installation. Testing
should be performed by an International Concrete Repair Institute (ICRI) certified technician; please visit

http://www.icri.org
. All on or below grade concrete subfloors must also have a confirmed effective vapor retarder pre-installed underneath that
meets the requirements of ASTM 1745. If not, then use a moisture mitigation system that conforms to ASTM F3010. This
system must be applied following the manufacturers’ written instructions.
This product is not suitable for use in areas that are permanently wet. Test the surface for porosity according to ASTM F3191.
The water droplet must be absorbed within five minutes to be considered porous. If porous, no further action is required
regarding moisture. If the subfloor is non-porous concrete, then install a vapor retarder (≥ 6 mil thick) on the surface prior to
installing the floor.

Concrete Subfloors

New and existing concrete subfloors should meet the guidelines of the latest edition of ACI 302 and ASTM F710. Floors must
be smooth, permanently dry, clean and free of all foreign material such as dust, wax, solvents, paint, grease, oils and adhesive
residue. The surface must be hard, dense and free from powder or flaking. New concrete slabs must be dry. Maximum
moisture level per ASTM 1869 (CaCl test method) is 8 lbs. Maximum level for ASTM2170 (In-situ Relative Humidity test
method) is 85%. Do not install over concrete with a history of hydrostatic conditions. The pH level of concrete should be
between 7- 10.
The final responsibility for determining if the concrete is dry enough for install of the flooring lies with the floor covering
installer.

Wood Subfloors

Do not install material over wood subfloors that lay directly on concrete, or over dimensional wood lumber, or plywood used
over concrete.

All other subfloors such as plywood, OSB, particleboard, chipboard, wafer board, etc. must be structurally sound and must be
installed following their manufacturer’s recommendations. Local building codes may only establish minimum requirements of
the flooring system and may not provide adequate rigidity and support for proper installation and performance. Refer to ASTM
F1482 for wood panel underlayment recommendations.

Storage & Acclimation

The boxes of Formative Clic must be stored flat and neat (without overhanging). If appropriate, they can be left on the
transport pallet. Never store outdoors in shipping containers.

FORMATIVE CLIC
Part Code

FMC__0748    FORMATIVE CLIC 7  INCH X 48 INCH X 6.5 MM       




Available Colors
(use color code in the space provided in the part code above)
Aged Barnwood(103), Anise Oak(109), Auburn Oak(108), Chalk Oak(100),
Charred Oak(111), Espresso Hickory(110), Ginger Beech(104), Mist Ash(101),
Nutmeg Oak(105), Rustic Barnwood(102), Smoked Oak(107), Vintage
Barnwood(106

Reviews

There are no reviews yet.

Be the first to review “Formative Clic”

Your email address will not be published. Required fields are marked *

Your custom content goes here. You can add the content for individual product
Back to Top
Shopping Cart
Close

No products in the cart.

Cookies Notice

We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.