USD
  • USD
  • EUR
  • AUD
Login

Raptor P-2000 Shoulder Press (SPECIAL ORDER)

Home/Strength/Single Station/Raptor P-2000 Shoulder Press (SPECIAL ORDER)

Raptor P-2000 Shoulder Press (SPECIAL ORDER)

Out of stock

Compare Size Chart

TECHNICAL SPECS

  • 2″  x 4″  11 guage steel weight stack frame housing.
  • Form fitted outer weight stack shield.
  • ABS seat & back protective dishes.
  • Seamless upholstery.
  • Ergonomically formed handles with custom rubber grips.
  • Counter balanced drive arms.
  • Five position seat adjustment.
  • Bright red colored pull knobs.
  • Instructional color placard.
  • 225 lb. Weight Stack.
  • Start range limitation with numerical indexing, 1-5.
  • 1/4″  Nylon coated aricraft cable driven. 4800 lb. test.

GENERAL RAPTOR SPECS

  • Adjustable positions on all machines to accommodate all users to ensure correct bio-mechanical function. Adjustments are made with Heavy Duty spring loaded colored pull-pin knobs.
  • Weight Stacks are adjusted with a tethered, magnetic selector pin that extends through the entire weight stack.
  • Cable system with 1/4″ thick 4800lb test military spec galvanized oil impregnated air craft cable finished with a tough nylon coating to 3/16″ thick.
  • Manual tension adjusters on every machine for the cable adjustments.
  • Weight stack plates are solid steel machined precisely to with in an oz of weight.
  • Weight stack is accessible from a seated position.
  • Weight stacks are enclosed in full length shrouds.
  • Weight system allows user to increase by 5lb increments.
  • Instructional guide charts used to inform correct usage for each machine along with anatomical highlights to show which muscle groups are being worked.
  • Each machine is made with a lower starting weight stack and has counter-balanced arms when needed.
  • Heavy-duty 40 oz. commercial grade marine Naugahyde upholstery which is 85% mildew resistant. High density closed cell foam reinforced by thick plywood backing for stable support.
  • Exceeds all ASTM requirements.
  • Guide rods are 1″ CCRO ANSI 1045, solid steel hard chrome-plated with tensile strength of 75,000psi.
  • Frames are constructed of High Stress 3/16″ ASTM A-500 grade B structural steel tubing (11 gauge) 2″x4″, 2″x3″ tubing. 2″x3″ tubing on all uprights, 2″x2″x1/8″ ASTM A-500 grade B structural carbon steel tubing (11 gauge) is used on cross members and benches.
  • All welds are ground down and stress tested.
  • Custom color powder coat paint, 3 stage pre-paint preparatory process that includes a state of the art pellet blasting machine system that purifies steel. The steel is then sent through a preheat stage before the final magnetic paint powder is applied and baked for a long lasting hardened finish.
  • Urethane foam grades are a minimal grading of HR-125 (density pcf of 2.60 +/- 0,10 and above in high-compression areas) and HR-150 (density pcf of 4.60 +/- 0.30).
  • Cams are computer designed and laser cut to exact shape to allow proper variable resistance throughout the exercise complete range of motion. All cams are 1/4″ thick solid steel. The cams are different for each machine to provide correct movement for the exercise.
  • Shrouded pulley housing is 6″x1/4″ thick solid steel.
  • Pulley wheels are 4″ and 6″ solid fiberglass reinforced body with a 1/2″ cable groove. Oil dipped double sealed racer ball bearings with a 1/2″ axis shaft hole. Sealed for moisture and dust proof.

WARRANTY

  • Frames, Welds, Weight Stacks – 10 Years
  • Friction Free Bearings, CAMS, Guide Rods, Bushings, Pulley Wheels – 5 Years
  • Cables – 2 Years
  • Upholstery, Pop Pins – 1 Year
  • Polyurethane Rollers, Neoprene Rollers, Foam Rollers, Cosmetic Items Not Specified – 90 Days

Note: All Warranties are limited to Manufacturer defects.

Shopping Cart
Close

No products in the cart.

(+1) 4039424528